Brischke, Christian

[["dc.bibliographiccitation.issue","0"],["dc.bibliographiccitation.journal","Holzforschung"],["dc.bibliographiccitation.volume","0"],["dc.contributor.author","Brischke, Christian"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Koddenberg, Tim"],["dc.contributor.author","Kick, Annika E. B."],["dc.date.accessioned","2022-04-01T10:03:12Z"],["dc.date.available","2022-04-01T10:03:12Z"],["dc.date.issued","2022"],["dc.description.abstract","Abstract Haematoxylum campechianum is most prevalently used as dyewood; its use for furniture, flooring, or fencing is only of regional importance, which might be due to lacking data about its technological properties. Therefore, small specimens were cut from H. campechianum stems from plantations in the lowlands of the Usumacinta delta in Mexico. The latter were subjected to laboratory decay and moisture studies. Water vapour sorption, liquid water uptake, and swelling of H. campechianum appeared much lower in comparison with most European grown wood species and similar to tropical hardwoods such as Tectona grandis . After removal of water-soluble ingredients, water vapour sorption of H. campechianum specimens further decreased, which assigned such ingredients a somewhat hydrophilic character. Mean mass losses (ML) due to decay by white, brown, and soft rot fungi in laboratory tests were <5%. On the basis of a dose-response model, wetting ability factors and ML values from decay tests predicted an outdoor performance similar to T. grandis and Intsia bijuga . Based on this preliminary property profile, H. campechianum can be recommended for both outdoor (e.g. fencing, outdoor decking, railing) and indoor applications (e.g. flooring, manufacturing of furniture, wall and ceiling panels, decoration artwork)."],["dc.identifier.doi","10.1515/hf-2021-0187"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/106106"],["dc.language.iso","en"],["dc.notes.intern","DOI-Import GROB-530"],["dc.relation.eissn","1437-434X"],["dc.relation.issn","0018-3830"],["dc.title","Properties of Mexican bloodwood ( Haematoxylum campechianum L.). Part 2: moisture performance and biological durability"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.firstpage","1152"],["dc.bibliographiccitation.issue","12"],["dc.bibliographiccitation.journal","Forests"],["dc.bibliographiccitation.volume","10"],["dc.contributor.author","Brischke, Christian"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Nienaber, Dirk G.B."],["dc.contributor.author","Bollmus, Susanne"],["dc.date.accessioned","2020-12-10T18:47:03Z"],["dc.date.available","2020-12-10T18:47:03Z"],["dc.date.issued","2019"],["dc.identifier.doi","10.3390/f10121152"],["dc.identifier.eissn","1999-4907"],["dc.identifier.purl","https://resolver.sub.uni-goettingen.de/purl?gs-1/17068"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/78627"],["dc.language.iso","en"],["dc.notes.intern","DOI Import GROB-354"],["dc.notes.intern","Merged from goescholar"],["dc.publisher","MDPI"],["dc.relation.eissn","1999-4907"],["dc.rights","CC BY 4.0"],["dc.rights.uri","https://creativecommons.org/licenses/by/4.0"],["dc.title","Biological Durability of Sapling-Wood Products Used for Gardening and Outdoor Decoration"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dc.type.version","published_version"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.firstpage","576"],["dc.bibliographiccitation.issue","5"],["dc.bibliographiccitation.journal","Forests"],["dc.bibliographiccitation.volume","12"],["dc.contributor.author","Brischke, Christian"],["dc.contributor.author","Alfredsen, Gry"],["dc.contributor.author","Humar, Miha"],["dc.contributor.author","Conti, Elena"],["dc.contributor.author","Cookson, Laurie"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Flæte, Per Otto"],["dc.contributor.author","Fortino, Stefania"],["dc.contributor.author","Francis, Lesley"],["dc.contributor.author","Suttie, Ed"],["dc.contributor.author","Hundhausen, Ulrich"],["dc.contributor.author","Irbe, Ilze"],["dc.contributor.author","Jacobs, Kordula"],["dc.contributor.author","Klamer, Morten"],["dc.contributor.author","Kržišnik, Davor"],["dc.contributor.author","Lesar, Boštjan"],["dc.contributor.author","Melcher, Eckhard"],["dc.contributor.author","Meyer-Veltrup, Linda"],["dc.contributor.author","Morrell, Jeffrey J."],["dc.contributor.author","Norton, Jack"],["dc.contributor.author","Palanti, Sabrina"],["dc.contributor.author","Presley, Gerald"],["dc.contributor.author","Reinprecht, Ladislav"],["dc.contributor.author","Singh, Tripti"],["dc.contributor.author","Stirling, Rod"],["dc.contributor.author","Venäläinen, Martti"],["dc.contributor.author","Westin, Mats"],["dc.contributor.author","Wong, Andrew H. H."],["dc.date.accessioned","2021-07-05T15:00:44Z"],["dc.date.available","2021-07-05T15:00:44Z"],["dc.date.issued","2021"],["dc.description.abstract","Service life planning with timber requires reliable models for quantifying the effects of exposure-related parameters and the material-inherent resistance of wood against biotic agents. The Meyer-Veltrup model was the first attempt to account for inherent protective properties and the wetting ability of wood to quantify resistance of wood in a quantitative manner. Based on test data on brown, white, and soft rot as well as moisture dynamics, the decay rates of different untreated wood species were predicted relative to the reference species of Norway spruce (Picea abies). The present study aimed to validate and optimize the resistance model for a wider range of wood species including very durable species, thermally and chemically modified wood, and preservative treated wood. The general model structure was shown to also be suitable for highly durable materials, but previously defined maximum thresholds had to be adjusted (i.e., maximum values of factors accounting for wetting ability and inherent protective properties) to 18 instead of 5 compared to Norway spruce. As expected, both the enlarged span in durability and the use of numerous and partly very divergent data sources (i.e., test methods, test locations, and types of data presentation) led to a decrease in the predictive power of the model compared to the original. In addition to the need to enlarge the database quantity and improve its quality, in particular for treated wood, it might be advantageous to use separate models for untreated and treated wood as long as the effect of additional impact variables (e.g., treatment quality) can be accounted for. Nevertheless, the adapted Meyer-Veltrup model will serve as an instrument to quantify material resistance for a wide range of wood-based materials as an input for comprehensive service life prediction software."],["dc.description.abstract","Service life planning with timber requires reliable models for quantifying the effects of exposure-related parameters and the material-inherent resistance of wood against biotic agents. The Meyer-Veltrup model was the first attempt to account for inherent protective properties and the wetting ability of wood to quantify resistance of wood in a quantitative manner. Based on test data on brown, white, and soft rot as well as moisture dynamics, the decay rates of different untreated wood species were predicted relative to the reference species of Norway spruce (Picea abies). The present study aimed to validate and optimize the resistance model for a wider range of wood species including very durable species, thermally and chemically modified wood, and preservative treated wood. The general model structure was shown to also be suitable for highly durable materials, but previously defined maximum thresholds had to be adjusted (i.e., maximum values of factors accounting for wetting ability and inherent protective properties) to 18 instead of 5 compared to Norway spruce. As expected, both the enlarged span in durability and the use of numerous and partly very divergent data sources (i.e., test methods, test locations, and types of data presentation) led to a decrease in the predictive power of the model compared to the original. In addition to the need to enlarge the database quantity and improve its quality, in particular for treated wood, it might be advantageous to use separate models for untreated and treated wood as long as the effect of additional impact variables (e.g., treatment quality) can be accounted for. Nevertheless, the adapted Meyer-Veltrup model will serve as an instrument to quantify material resistance for a wide range of wood-based materials as an input for comprehensive service life prediction software."],["dc.description.sponsorship","ForestValue"],["dc.description.sponsorship","Open-Access-Publikationsfonds 2021"],["dc.identifier.doi","10.3390/f12050576"],["dc.identifier.pii","f12050576"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/87891"],["dc.language.iso","en"],["dc.notes.intern","DOI Import DOI-Import GROB-441"],["dc.relation.eissn","1999-4907"],["dc.relation.orgunit","Abteilung Holzbiologie und Holzprodukte"],["dc.rights","CC BY 4.0"],["dc.title","Modelling the Material Resistance of Wood—Part 2: Validation and Optimization of the Meyer-Veltrup Model"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dc.type.subtype","original_ja"],["dc.type.version","published_version"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.firstpage","445"],["dc.bibliographiccitation.issue","5"],["dc.bibliographiccitation.journal","Holzforschung"],["dc.bibliographiccitation.lastpage","455"],["dc.bibliographiccitation.volume","73"],["dc.contributor.author","Brischke, Christian"],["dc.contributor.author","Stricker, Simon"],["dc.contributor.author","Meyer-Veltrup, Linda"],["dc.contributor.author","Emmerich, Lukas"],["dc.date.accessioned","2020-12-10T18:42:21Z"],["dc.date.available","2020-12-10T18:42:21Z"],["dc.date.issued","2019"],["dc.identifier.doi","10.1515/hf-2018-0171"],["dc.identifier.eissn","1437-434X"],["dc.identifier.issn","0018-3830"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/77910"],["dc.notes.intern","DOI Import GROB-354"],["dc.title","Changes in sorption and electrical properties of wood caused by fungal decay"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.firstpage","27"],["dc.bibliographiccitation.issue","1"],["dc.bibliographiccitation.journal","International wood products journal"],["dc.bibliographiccitation.lastpage","37"],["dc.bibliographiccitation.volume","11"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Militz, Holger"],["dc.contributor.author","Brischke, Christian"],["dc.date.accessioned","2020-12-10T18:15:32Z"],["dc.date.available","2020-12-10T18:15:32Z"],["dc.date.issued","2020"],["dc.identifier.doi","10.1080/20426445.2020.1715553"],["dc.identifier.eissn","2042-6453"],["dc.identifier.issn","2042-6445"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/74875"],["dc.language.iso","en"],["dc.notes.intern","DOI Import GROB-354"],["dc.title","Long-term performance of DMDHEU-treated wood installed in different test set-ups in ground, above ground and in the marine environment"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.firstpage","786"],["dc.bibliographiccitation.issue","9"],["dc.bibliographiccitation.journal","Holzforschung"],["dc.bibliographiccitation.lastpage","797"],["dc.bibliographiccitation.volume","75"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Bleckmann, Maja"],["dc.contributor.author","Strohbusch, Sarah"],["dc.contributor.author","Brischke, Christian"],["dc.contributor.author","Bollmus, Susanne"],["dc.contributor.author","Militz, Holger"],["dc.date.accessioned","2021-10-01T09:58:15Z"],["dc.date.available","2021-10-01T09:58:15Z"],["dc.date.issued","2021"],["dc.description.abstract","Abstract Chemical wood modification has been used to modify wood and improve its decay resistance. However, the mode of protective action is still not fully understood. Occasionally, outdoor products made from chemically modified timber (CMT) show internal decay while their outer shell remains intact. Hence, it was hypothesized that wood decay fungi may grow through CMT without losing their capability to degrade non-modified wood. This study aimed at developing a laboratory test set-up to investigate (1) whether decay fungi grow through CMT and (2) retain their ability to degrade non-modified wood. Acetylated and 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) treated wood were used in decay tests with modified ‘mantle specimens’ and untreated ‘core dowels’. It became evident that white rot ( Trametes versicolor ), brown rot ( Coniophora puteana ) and soft rot fungi can grow through CMT without losing their ability to degrade untreated wood. Consequently, full volume impregnation of wood with the modifying agent is required to achieve complete protection of wooden products. In decay tests with DMDHEU treated specimens, significant amounts of apparently non-fixated DMDHEU were translocated from modified mantle specimens to untreated wood cores. A diffusion-driven transport of nitrogen and DMDHEU seemed to be responsible for mass translocation during decay testing."],["dc.description.abstract","Abstract Chemical wood modification has been used to modify wood and improve its decay resistance. However, the mode of protective action is still not fully understood. Occasionally, outdoor products made from chemically modified timber (CMT) show internal decay while their outer shell remains intact. Hence, it was hypothesized that wood decay fungi may grow through CMT without losing their capability to degrade non-modified wood. This study aimed at developing a laboratory test set-up to investigate (1) whether decay fungi grow through CMT and (2) retain their ability to degrade non-modified wood. Acetylated and 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) treated wood were used in decay tests with modified ‘mantle specimens’ and untreated ‘core dowels’. It became evident that white rot ( Trametes versicolor ), brown rot ( Coniophora puteana ) and soft rot fungi can grow through CMT without losing their ability to degrade untreated wood. Consequently, full volume impregnation of wood with the modifying agent is required to achieve complete protection of wooden products. In decay tests with DMDHEU treated specimens, significant amounts of apparently non-fixated DMDHEU were translocated from modified mantle specimens to untreated wood cores. A diffusion-driven transport of nitrogen and DMDHEU seemed to be responsible for mass translocation during decay testing."],["dc.identifier.doi","10.1515/hf-2020-0252"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/90022"],["dc.language.iso","en"],["dc.notes.intern","DOI Import GROB-469"],["dc.relation.eissn","1437-434X"],["dc.relation.issn","0018-3830"],["dc.title","Growth behavior of wood-destroying fungi in chemically modified wood: wood degradation and translocation of nitrogen compounds"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.journal","Wood Science and Technology"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Ehrmann, Alexander"],["dc.contributor.author","Brischke, Christian"],["dc.contributor.author","Militz, Holger"],["dc.date.accessioned","2021-07-05T15:00:52Z"],["dc.date.available","2021-07-05T15:00:52Z"],["dc.date.issued","2021"],["dc.description.abstract","Abstract Glyoxal-based condensation resins like 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) have been used to modify wood and improve its resistance against decaying fungi. High biological durability of DMDHEU-treated wood has already been confirmed in laboratory and field tests in the past. However, the modes of protective action behind an improved decay resistance are not fully understood yet. Furthermore, it is questionable how the use of formaldehyde-poor N-methylol and formaldehyde-free N-methyl compounds instead of DMDHEU affects the moisture behavior and durability, respectively. In this study, wood blocks were treated with N-methylol (DMDHEU, methylated DMDHEU) and N-methyl compounds (1,3-dimethyl-4,5-dihydroxyethyleneurea; DMeDHEU). Untreated and modified specimens were exposed to different moisture regimes and wood-destroying fungi in order to study the indicators that control changes in the wetting ability and decay resistance. Both N-methylol and N-methyl compounds decreased the water uptake and release and increased the durability of Scots pine sapwood from ‘not durable’ (DC 5) to ‘very durable to durable’ (DC 1–2). However, high fluctuations were observed in water uptake and release as well as mass loss (ML) caused by fungal decay, when modified specimens were tested without passing through a cold-water leaching. Consequently, a significant effect of the leaching procedure according to EN 84 on the durability classification could be established. The latter appeared more pronounced for treatments with N-methyl compounds compared to N-methylol compounds. Finally, wetting ability ( k wa ) and resistance indicating factors ( k inh ) enabled a forecast of high biological durability for both treatments with N-methylol and N-methyl compounds under real service life conditions."],["dc.description.abstract","Abstract Glyoxal-based condensation resins like 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) have been used to modify wood and improve its resistance against decaying fungi. High biological durability of DMDHEU-treated wood has already been confirmed in laboratory and field tests in the past. However, the modes of protective action behind an improved decay resistance are not fully understood yet. Furthermore, it is questionable how the use of formaldehyde-poor N-methylol and formaldehyde-free N-methyl compounds instead of DMDHEU affects the moisture behavior and durability, respectively. In this study, wood blocks were treated with N-methylol (DMDHEU, methylated DMDHEU) and N-methyl compounds (1,3-dimethyl-4,5-dihydroxyethyleneurea; DMeDHEU). Untreated and modified specimens were exposed to different moisture regimes and wood-destroying fungi in order to study the indicators that control changes in the wetting ability and decay resistance. Both N-methylol and N-methyl compounds decreased the water uptake and release and increased the durability of Scots pine sapwood from ‘not durable’ (DC 5) to ‘very durable to durable’ (DC 1–2). However, high fluctuations were observed in water uptake and release as well as mass loss (ML) caused by fungal decay, when modified specimens were tested without passing through a cold-water leaching. Consequently, a significant effect of the leaching procedure according to EN 84 on the durability classification could be established. The latter appeared more pronounced for treatments with N-methyl compounds compared to N-methylol compounds. Finally, wetting ability ( k wa ) and resistance indicating factors ( k inh ) enabled a forecast of high biological durability for both treatments with N-methylol and N-methyl compounds under real service life conditions."],["dc.identifier.doi","10.1007/s00226-021-01303-8"],["dc.identifier.pii","1303"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/87921"],["dc.language.iso","en"],["dc.notes.intern","DOI Import DOI-Import GROB-441"],["dc.relation.eissn","1432-5225"],["dc.relation.issn","0043-7719"],["dc.title","Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.artnumber","199"],["dc.bibliographiccitation.issue","2"],["dc.bibliographiccitation.journal","Forests"],["dc.bibliographiccitation.volume","10"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Wülfing, Georg"],["dc.contributor.author","Brischke, Christian"],["dc.date.accessioned","2019-07-09T11:50:10Z"],["dc.date.available","2019-07-09T11:50:10Z"],["dc.date.issued","2019"],["dc.description.abstract","The structural integrity of wood is closely related to its brittleness and thus to its suitability for numerous applications where dynamic loads, wear and abrasion occur. The structural integrity of wood is only vaguely correlated with its density, but affected by different chemical, physico-structural and anatomical characteristics, which are difficult to encompass as a whole. This study aimed to analyze the results from High-Energy Multiple Impact (HEMI) tests of a wide range of softwood and hardwood species with an average oven-dry wood density in a range between 0.25 and 0.99 g/cm3 and multifaceted anatomical features. Therefore, small clear specimens from a total of 40 different soft- and hardwood species were crushed in a heavy vibratory ball mill. The obtained particles were fractionated and used to calculate the ‘Resistance to Impact Milling (RIM)’ as a measure of the wood structural integrity. The differences in structural integrity and thus in brittleness were predominantly affected by anatomical characteristics. The size, density and distribution of vessels as well as the ray density of wood were found to have a significant impact on the structural integrity of hardwoods. The structural integrity of softwood was rather affected by the number of growth ring borders and the occurrence of resin canals. The density affected the Resistance to Impact Milling (RIM) of neither the softwoods nor the hardwoods."],["dc.identifier.doi","10.3390/f10020199"],["dc.identifier.purl","https://resolver.sub.uni-goettingen.de/purl?gs-1/15877"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/59718"],["dc.language.iso","en"],["dc.notes.intern","Merged from goescholar"],["dc.publisher","MDPI"],["dc.relation.eissn","1999-4907"],["dc.rights","CC BY 4.0"],["dc.rights.uri","https://creativecommons.org/licenses/by/4.0"],["dc.subject.ddc","570"],["dc.title","The Impact of Anatomical Characteristics on the Structural Integrity of Wood"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dc.type.version","published_version"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.firstpage","666"],["dc.bibliographiccitation.issue","6"],["dc.bibliographiccitation.journal","Forests"],["dc.bibliographiccitation.volume","11"],["dc.contributor.author","Humar, Miha"],["dc.contributor.author","Repič, Rožle"],["dc.contributor.author","Kržišnik, Davor"],["dc.contributor.author","Lesar, Boštjan"],["dc.contributor.author","Cerc Korošec, Romana"],["dc.contributor.author","Brischke, Christian"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Rep, Gregor"],["dc.date.accessioned","2021-04-14T08:25:05Z"],["dc.date.available","2021-04-14T08:25:05Z"],["dc.date.issued","2020"],["dc.description.sponsorship","Javna Agencija za Raziskovalno Dejavnost RS"],["dc.identifier.doi","10.3390/f11060666"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/81522"],["dc.language.iso","en"],["dc.notes.intern","DOI Import GROB-399"],["dc.publisher","MDPI"],["dc.relation.eissn","1999-4907"],["dc.rights","https://creativecommons.org/licenses/by/4.0/"],["dc.title","Quality Control of Thermally Modified Timber Using Dynamic Vapor Sorption (DVS) Analysis"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dspace.entity.type","Publication"]]

[["dc.bibliographiccitation.issue","0"],["dc.bibliographiccitation.journal","Holzforschung"],["dc.bibliographiccitation.volume","0"],["dc.contributor.author","Koddenberg, Tim"],["dc.contributor.author","Brischke, Christian"],["dc.contributor.author","Emmerich, Lukas"],["dc.contributor.author","Kick, Annika B. E."],["dc.date.accessioned","2022-04-01T10:03:11Z"],["dc.date.available","2022-04-01T10:03:11Z"],["dc.date.issued","2022"],["dc.description.abstract","Abstract Bloodwood ( Haematoxylum campechianum L.) native to Central America has been known as dye source since the prehistoric times by the Maya. Nowadays, bloodwood is increasingly used for plantations but its use for furniture, flooring, or fencing is only of regional importance. The reason is seen in lacking knowledge of its properties. To expand that knowledge, this Part 1 of the two-part study series investigated the anatomy and the discolouration due to leaching of heartwood of H. campechianum . Anatomical characteristics were described qualitatively and quantitively using scanning electron microscopy and X-ray micro-computed tomography. Detailed wood anatomical data are presented, together with numerical analyses of cell parameters. Apart from wood anatomy, colourimetric analyses were obtained after 10 leaching cycles. The colour change of the wood due to water exposure was determined measuring in CIE L a b colour system. In addition, the extinction of the leachate was determined spectrophotometrically after each leaching cycle. The resulting colour change was evaluated according to colour change after each cycle. The most prominent change in colour was observed for the first cycle due to leaching. Because of the extensive leaching of extractives, further investigation might address the effect of leaching of water-soluble extractives on adhesion properties of bloodwood."],["dc.identifier.doi","10.1515/hf-2021-0186"],["dc.identifier.uri","https://resolver.sub.uni-goettingen.de/purl?gro-2/106105"],["dc.language.iso","en"],["dc.notes.intern","DOI-Import GROB-530"],["dc.relation.eissn","1437-434X"],["dc.relation.issn","0018-3830"],["dc.title","Properties of Mexican bloodwood ( Haematoxylum campechianum L.). Part 1: anatomical and colourimetric characteristics"],["dc.type","journal_article"],["dc.type.internalPublication","yes"],["dspace.entity.type","Publication"]]